the cylindrical rollers, it is meaning the outer surface is substantially straight and parallel to the axi of the roller. the cylindrical rollers are precision parts for bearing.
steel cylindrical rollers are remarkable for their high mechanical strength and long lasting functional life. cylindrical rollers had multiple uses in a variety of industries including automotive, truck, farm and construction equipment, two-cycle engines, outboard engines and consumer durables.
these rollers are in high precision, and widely used in the areas of airplane, express train, robot, NC machinery, ship, engineering machinery, and bearing.
the precision cylindrical roller bearings for screw drives feature a combination of axial cylindrical rollers and radial needle rollers. This unique configuration helps manage loads from multiple directions during highspeed operation. Several designs are available to accommodate varying screw drive designs.
the ground ends needle rollers are mainly used as bearing rolling elements to transmit torque and reduce friction. They can also serve as precision shafts or as precision locating pins
sizes | Dw | Lw | rsmin | rsmax | sizes | Dw | Lw | rsmin | rsmax | |
---|---|---|---|---|---|---|---|---|---|---|
3x3 | 3 | 3 | 0.2 | 0.4 | 3x5 | 3 | 5 | 0.2 | 0.4 | |
3.5x5 | 3.5 | 5 | 0.2 | 0.4 | 4x4 | 4 | 4 | 0.2 | 0.4 | |
4x6 | 4 | 6 | 0.2 | 0.4 | 4x8 | 4 | 8 | 0.2 | 0.4 | |
4.5x4.5 | 4.5 | 4.5 | 0.2 | 0.6 | 4.5x6 | 4.5 | 6 | 0.2 | 0.6 | |
5x5 | 5 | 5 | 0.2 | 0.6 | 5x8 | 5 | 8 | 0.2 | 0.6 | |
5x10 | 5 | 10 | 0.2 | 0.6 | 5.5x5.5 | 5.5 | 5.5 | 0.2 | 0.6 | |
5.5x8 | 5.5 | 8 | 0.2 | 0.6 | 6x6 | 6 | 6 | 0.2 | 0.6 | |
6x8 | 6 | 8 | 0.2 | 0.6 | 6x10 | 6 | 10 | 0.2 | 0.6 | |
6x12 | 6 | 12 | 0.2 | 0.6 | 6.5x6.5 | 6.5 | 6.5 | 0.2 | 0.6 | |
6.5x9 | 6.5 | 9 | 0.2 | 0.6 | 7x7 | 7 | 7 | 0.2 | 0.6 | |
7x10 | 7 | 10 | 0.2 | 0.6 | 7x14 | 7 | 14 | 0.2 | 0.6 | |
7.5x7.5 | 7.5 | 7.5 | 0.2 | 0.6 | 7.5x9 | 7.5 | 9 | 0.2 | 0.6 | |
7.5x11 | 7.5 | 11 | 0.2 | 0.6 | 8x8 | 8 | 8 | 0.2 | 0.6 | |
8x10 | 8 | 10 | 0.2 | 0.6 | 8x12 | 8 | 12 | 0.2 | 0.6 | |
9x9 | 9 | 9 | 0.3 | 0.7 | 9x10 | 9 | 10 | 0.3 | 0.7 | |
9x14 | 9 | 14 | 0.3 | 0.7 | 10x10 | 10 | 10 | 0.3 | 0.7 | |
10x11 | 10 | 11 | 0.3 | 0.7 | 10x14 | 10 | 14 | 0.3 | 0.7 | |
11x11 | 11 | 11 | 0.3 | 0.7 | 11x12 | 11 | 12 | 0.3 | 0.7 | |
11x15 | 11 | 15 | 0.3 | 0.7 | 12x12 | 12 | 12 | 0.3 | 0.7 | |
12x14 | 12 | 14 | 0.3 | 0.7 | 12x18 | 12 | 18 | 0.3 | 0.7 | |
13x13 | 13 | 13 | 0.4 | 0.8 | 13x20 | 13 | 20 | 0.4 | 0.8 | |
14x14 | 14 | 14 | 0.4 | 0.8 | 14x20 | 14 | 20 | 0.4 | 0.8 | |
15x15 | 15 | 15 | 0.4 | 0.8 | 15x16 | 15 | 16 | 0.4 | 0.8 | |
15x22 | 15 | 22 | 0.4 | 0.8 | 16x16 | 16 | 16 | 0.4 | 0.8 | |
16x17 | 16 | 17 | 0.4 | 0.8 | 16x24 | 16 | 24 | 0.4 | 0.8 | |
17x17 | 17 | 17 | 0.4 | 1.0 | 17x24 | 17 | 24 | 0.4 | 1.0 | |
18x18 | 18 | 18 | 0.4 | 1.0 | 18x19 | 18 | 19 | 0.4 | 1.0 | |
18x26 | 18 | 26 | 0.4 | 1.0 | 19x19 | 19 | 19 | 0.4 | 1.0 | |
19x20 | 19 | 20 | 0.4 | 1.0 | 19x28 | 19 | 28 | 0.4 | 1.0 | |
20x20 | 20 | 20 | 0.4 | 1.0 | 20x30 | 20 | 30 | 0.4 | 1.0 | |
21x21 | 21 | 21 | 0.5 | 1.1 | 21x30 | 21 | 30 | 0.5 | 1.1 | |
22x22 | 22 | 22 | 0.5 | 1.1 | 22x24 | 22 | 24 | 0.5 | 1.1 | |
22x34 | 22 | 34 | 0.5 | 1.1 | 23x23 | 23 | 23 | 0.5 | 1.1 | |
24x24 | 24 | 24 | 0.5 | 1.1 | 24x26 | 24 | 26 | 0.5 | 1.1 | |
24x36 | 24 | 36 | 0.5 | 1.1 | 25x25 | 25 | 25 | 0.5 | 1.1 | |
25x36 | 25 | 36 | 0.5 | 1.1 | 26x26 | 22 | 26 | 0.5 | 1.1 | |
26x28 | 22 | 28 | 0.5 | 1.1 | 26x40 | 22 | 10 | 0.5 | 1.1 | |
28x28 | 28 | 28 | 0.6 | 1.4 | 28x44 | 28 | 44 | 0.6 | 1.4 | |
30x30 | 30 | 30 | 0.6 | 1.4 | 30x48 | 30 | 48 | 0.6 | 1.4 | |
32x32 | 32 | 32 | 0.6 | 1.4 | 32x52 | 32 | 52 | 0.6 | 1.4 | |
34x34 | 34 | 34 | 0.6 | 1.4 | 34x55 | 34 | 55 | 0.6 | 1.4 | |
36x36 | 36 | 36 | 0.7 | 1.7 | 36x58 | 36 | 58 | 0.7 | 1.7 | |
38x38 | 38 | 38 | 0.7 | 1.7 | 38x62 | 38 | 62 | 0.7 | 1.7 | |
40x40 | 40 | 40 | 0.7 | 1.7 | 40x65 | 40 | 65 | 0.7 | 1.7 | |
42x42 | 42 | 42 | 0.9 | 2.1 | 45x45 | 45 | 45 | 0.9 | 2.1 | |
total | more than 100 cylindrical rollers of loose roller bearings |
grade | Dw/mm | VDwL | IG | regulation values | ▽Cir | |||||
---|---|---|---|---|---|---|---|---|---|---|
exceed | to | max | max | |||||||
G0 | - | 18 | 1 | 1 | -10,...,-1 | 0 | +1,...,+5 | 0.3 | ||
G0 | 18 | 30 | 1 | 1 | -10,...,-1 | 0 | +1,...,+5 | 0.4 | ||
G1 | - | 18 | 2 | 1 | -10,...,-1 | 0 | +1,...,+5 | 0.30.4 | ||
G1 | 18 | 30 | 2 | 1.5 | -10.5,...,-1.5 | 0 | +1.5,...,+6 | 0.5 | ||
G2 | - | 18 | 3 | 1 | -10,...,-1 | 0 | +1,...,+5 | 0.5 | ||
G2 | 18 | 30 | 3 | 1.5 | -19.5,...,-1.5 | 0 | +1.5,...,+6 | 1.0 | ||
G2 | 30 | - | 3 | 2 | -20,...,-2 | 0 | +2,...,+6 | 1.5 | ||
G3 | - | 18 | 1 | 1 | -10,...,-1 | 0 | +1,...,+5 | 1.0 | ||
G3 | 18 | 30 | 1 | 2 | -20,...,-2 | 0 | +2,...,+6 | 1.5 | ||
G3 | 30 | - | 5 | 3 | -24,...,-3 | 0 | +3,...,+6 | 2.5 | ||
total | 10 cylindrical rollers of loose roller bearings |
angle | wave numbers | |||||||||
3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19 | 21 | |
60°C | 3 | - | - | 3 | - | - | 3 | - | - | 3 |
90°C | 2 | 2 | - | - | 2 | 2 | - | - | 2 | 2 |
120°C | 1 | 2 | 2 | 1 | - | - | 1 | 2 | 2 | |
total | 3 cylindrical rollers of loose roller bearings |
---|